Fastener Tightening Specifications
FASTENER TIGHTENING SPECIFICATIONS (1 OF 2)
| ITEM | SPECIFICATION |
|---|---|
| Air cleaner | |
| Air cleaner bolt | 8.8 +/- 1.0 N.m (78 +/- 9 in-lb) |
| Air cleaner bracket bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Air cleaner bracket bolt (ground) | 22 +/- 4 N.m (16 +/- 3 ft-lb) |
| Air intake hose clamp bolt | 3.9 +/- 1.0 N.m (35 +/- 8 in-lb) |
| Resonator bolt | 3.0 +/- 0.5 N.m (27 +/- 4 in-lb) |
| Resonator clamp bolt | 4.0 +/- 1.0 N.m (36 +/- 8 in-lb) |
| Mass airflow sensor bolt | 1.8 +/- 0.6 N.m (16 +/- 5 in-lb) |
| Exhaust manifold < EXCEPT FOR CALIFORNIA > | |
| Exhaust manifold nut | 49 +/- 5 N.m (36 +/- 4 ft-lb) |
| Front exhaust pipe nut | 49 +/-10 N.m (37 +/- 7 ft-lb) |
| Front exhaust pipe bracket bolt | 35 +/- 5 N.m (26 +/- 4 ft-lb) |
| Heat protector bolt | 14+/- 1 N.m (120 +/- 13 in-lb) |
| Exhaust manifold < VEHICLES FOR CALIFORNIA > | |
| Exhaust manifold bracket bolt | 35 +/- 6 N.m (26 +/- 4 ft-lb) |
| Exhaust manifold nut | 49 +/- 5 N.m (36 +/- 4 ft-lb) |
| Front exhaust pipe bolt | 50 +/- 5 N.m (37 +/- 4 ft-lb) |
| Heat protector bolt | 30 +/- 2 N.m (22 +/- 2 ft-lb) |
| Exhaust pipe and main muffler < EXCEPT FOR CALIFORNIA > | |
| Center exhaust pipe nut | 59 +/-10 N.m (44 +/- 7 ft-lb) |
| Dumper bolt | 13 +/- 2 N.m (111 +/-22 in-lb) |
| Front exhaust pipe bolt | 49 +/-10 N.m (37 +/- 7 ft-lb) |
| Front exhaust pipe bracket bolt | 35 +/- 5 N.m (26 +/- 4 ft-lb) |
| Front exhaust pipe nut | 49 +/-10 N.m (37 +/- 7 ft-lb) |
| Hanger bolt | 13 +/- 2 N.m (111 +/-22 in-lb) |
| Heated oxygen sensor (rear) | 44 +/- 5 N.m (33 +/- 3 ft-lb) |
| Main muffler bolt | 45 +/- 5 N.m (34 +/- 3 ft-lb) |
| Exhaust pipe and main muffler < VEHICLES FOR CALIFORNIA > | |
| Center exhaust pipe bolt | 45 +/- 5 N.m (34 +/- 3 ft-lb) |
| Center exhaust pipe nut | 59 +/-10 N.m (44 +/- 7 ft-lb) |
| Front exhaust pipe bolt (catalytic converter side) | 49 +/-10 N.m (37 +/- 7 ft-lb) |
| Front exhaust pipe bolt (exhaust manifold side) | 50 +/- 5 N.m (37 +/- 4 ft-lb) |
| Hanger bolt | 13 +/- 2 N.m (111 +/-22 in-lb) |
| Heated oxygen sensor (rear) | 45 +/- 5 N.m (34 +/- 3 ft-lb) |
| Intake manifold | |
| EGR valve bolt | 24 +/- 3 N.m (18 +/- 2 ft-lb) |
FASTENER TIGHTENING SPECIFICATIONS (2 OF 2)
| ITEM | SPECIFICATION |
|---|---|
| Evaporative emission purge solenoid valve, evaporative emission vacuum hose and pipe assembly bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Harness cramp bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Intake manifold bolt | 24 +/- 3 N.m (18 +/- 2 ft-lb) |
| Intake manifold nut | 20 +/- 2 N.m (15 +/- 1 ft-lb) |
| Intake manifold stay bolt | 31 +/- 3 N.m (23 +/- 2 ft-lb) |
| Knock sensor connector cramp bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Manifold absolute pressure sensor bolt | 5.0 +/- 1.0 N.m (44 +/- 9 in-lb) |
| Oil dipstick guide bolt | 13 +/- 1 N.m (115 +/- 9 in-lb) |
| Thermostat housing assembly bolt | 24 +/- 4 N.m (18 +/- 3 ft-lb) |