LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2005 >> Outlander XLS, AWD >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Starter Motor Assembly >> Inspection >> Magnetic Switch

Magnetic Switch

  1. Coil open circuit test
    • Check that there is continuity between the M terminal and body A.
    • If there is no continuity, replace the magnetic switch.
    Fig 1: Identifying M Terminal And Body A
    G02482139Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Contact fusion check
    • Check that there is no continuity between the B terminal and M terminal.
    • If there is continuity, replace the magnetic switch.
    Fig 2: Identifying B Terminal And M Terminal
    G02482140Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Switch contact check
    • Push the indicated end of the magnetic switch with a strong force to close the internal contacts. Without releasing the switch end, check that there is continuity between the B terminal and M terminal.
    • If there is no continuity, replace the magnetic switch.
    Fig 3: Identifying B Terminal And M Terminal
    G02482141Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals