LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2005 >> Outlander Limited, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Traction Control/Active Skid Control System) >> G And Yaw Rate Sensor >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2005 Mitsubishi Endeavor. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Do not drop or shock the G and yaw rate sensor.
CAUTION: Always carry out calibration if steering angle is adjusted (Refer to G AND YAW RATE SENSOR CALIBRATION ). This is necessary because the TCL/ASC-ECU should update the G and yaw rate sensor neutral point.
Fig 1: Removing G And Yaw Rate Sensor
G02366364Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.