Fastener Tightening Specifications
WARNING: This page is about a different car, the 2005 Mitsubishi Endeavor. However, it is still accessible from the selected car via links, so may be relevant.
FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| Caliper assembly bolt | 90 +/- 10 N.m (67 +/- 7 ft-lb) |
| Center bearing bracket bolt < FWD > | 41 +/- 4 N.m (30 +/- 3 ft-lb) |
| Drive shaft nut | 226 +/- 29 N.m (167 +/- 21 ft-lb) |
| Dust cover bolt | 9 +/- 2.0 N.m (80 +/- 17 in-lb) |
| Front strut nut | 305 +/- 25 N.m (225 +/- 18 ft-lb) |
| Front wheel hub bolt | 90 +/- 10 N.m (67 +/- 7 ft-lb) |
| Lower arm ball joint nut | 110 +/- 10 N.m (81 +/- 7 ft-lb) |
| Tie rod end nut | 29 +/- 4 N.m (21 +/- 3 ft-lb) |