Fastener Tightening Specifications
WARNING: This page is about a different car, the 2005 Mitsubishi Endeavor. However, it is still accessible from the selected car via links, so may be relevant.
FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| Power steering gear box and linkage | |
| Crossmember mounting bolt | 180 +/- 20 N.m (133 +/- 14 ft-lb) |
| Crossmember mounting nut | 180 +/- 20 N.m (133 +/- 14 ft-lb) |
| Front axle crossmember stay mounting bolt | 83 +/- 12 N.m (61 +/- 9 ft-lb) |
| Heat protector to steering mounting gear side bracket connecting bolt | 5.0 +/- 1.0 N.m (44 +/- 9 in-lb) |
| Lower arm and crossmember connecting bolt | 165 +/- 15 N.m (122 +/- 11 ft-lb) |
| Power steering gear bracket mounting bolt | 58 +/- 7 N.m (43 +/- 5 ft-lb) |
| Pressure tube flare nut | 15 +/- 3 N.m (11 +/- 2 ft-lb) |
| Pressure tube to pressure hose connecting nut | 34 +/- 5 N.m (25 +/- 4 ft-lb) |
| Pressure tube/Pressure hose mounting bolt and nut | 12 +/- 2 N.m (102 +/- 22 in-lb) |
| Rear roll stopper mounting bolt | 58 +/- 7 N.m (43 +/- 5 ft-lb) |
| Rear roll stopper to power steering gear bracket connecting bolt | 58 +/- 7 N.m (43 +/- 5 ft-lb) |
| Rear roll stopper to rear roll stopper bracket connecting nut | 58 +/- 7 N.m (43 +/- 5 ft-lb) |
| Return tube flare nut | 15 +/- 3 N.m (11 +/- 2 ft-lb) |
| Return tube mounting bolt and nut | 12 +/- 2 N.m (102 +/- 22 in-lb) |
| Steering extension mounting bolt | 27 +/- 2 N.m (20 +/- 1 ft-lb) |
| Steering gear mounting bolt | 83 +/- 12 N.m (61 +/- 9 ft-lb) |
| Steering gear mounting gear side bracket mounting bolt | 83 +/- 12 N.m (61 +/- 9 ft-lb) |
| Tie rod | 89 +/- 9 N.m (65 +/- 7 ft-lb) |
| Tie rod end jam nut | 52 +/- 2 N.m (38 +/- 2 ft-lb) |
| Tie rod end to knuckle self-locking nut | 29 +/- 4 N.m (21 +/- 3 ft-lb) |
| Power steering hose | |
| Cooler tube clamp bolt | 12 +/- 2 N.m (102 +/- 22 in-lb) |
| Oil pump eye bolt | 57 +/- 7 N.m (42 +/- 5 ft-lb) |
| Oil reservoir bolt | 12 +/- 2 N.m (102 +/- 22 in-lb) |
| Pressure hose, pressure tube, return tube clamp bolt | 12 +/- 2 N.m (102 +/- 22 in-lb) |
| Pressure tube, return tube flare nut | 15 +/- 3 N.m (11 +/- 2 ft-lb) |
| Power steering oil pump | |
| Belt tensioner bracket to power steering pump bracket connecting bolt (long) | 41 +/- 8 N.m (30 +/- 6 ft-lb) |
| Belt tensioner bracket to power steering pump bracket connecting bolt (short) | 49 +/- 9 N.m (36 +/- 7 ft-lb) |
| Belt tensioner pulley mounting nut | 15 +/- 4 N.m (11 +/- 3 ft-lb) |
| Oil pump mounting bolt | 46 +/- 8 N.m (34 +/- 6 ft-lb) |
| Oil pump mounting nut | 42 +/- 7 N.m (31 +/- 5 ft-lb) |
| Power steering pump bracket mounting bolt | 41 +/- 8 N.m (30 +/- 6 ft-lb) |
| Steering shaft | |
| Steering column shaft assembly and steering gear connecting bolt | 18 +/- 2 N.m (13 +/- 2 ft-lb) |
| Steering column shaft assembly bolt | 12 +/- 2 N.m (102 +/- 22 in-lb) |
| Steering wheel | |
| Steering wheel mounting nut | 41 +/- 8 N.m (30 +/- 6 ft-lb) |
| Torx screw | 9.0 +/- 2.0 N.m (80 +/- 17 in-lb) |