LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2005 >> Outlander LS, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Power Steering) >> On-Vehicle Service >> Fluid Replacement

Fluid Replacement

WARNING: This page is about a different car, the 2005 Mitsubishi Endeavor. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the front wheels.
  2. Disconnect the return hose connection, and then connect a vinyl hose to the return hose, and drain the fluid into a container.
    Fig 1: Disconnecting Return Hose Connection & Connecting Vinyl Hose To Return Hose
    G02412213Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Disconnect the ignition coil connectors (Refer to IGNITION COIL ).
  4. While operating the starter motor intermittently, turn the steering wheel all the way to the left and right several times to drain all of the fluid.
  5. Connect the return hose securely, and then secure with the clip.
  6. Fill the oil reservoir with GENUINE MITSUBISHI POWER STEERING FLUID up to the lower mark of the reservoir, and then bleed the air.
scientia non olet · About LEMON Manuals