LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2005 >> Lancer Evolution MR >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Rear Suspension & Wheel Alignment - Evolution >> Shock Absorber Assembly >> Removal And Installation

Removal And Installation

CAUTION:
  • During maintenance, take care not to contact the parts or tools to the caliper, because the paint of caliper will be scratched. And if there is brake fluid on the caliper, wipe out quickly.
  • *: To prevent bushings from breakage, the parts indicated by * should be temporarily tightened, and then fully tightened with the vehicle on the ground in the unladen condition.
    Fig 1: Removing/Installing Shock Absorber Assembly
    G02398683Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.