Service Specifications
WARNING: This page is about a different variant/trim than selected.
Fastener Tightening Specifications
| ITEM | SPECIFICATION | |
|---|---|---|
| Toe-in mm (in.) | 0 ± 2 (0 ± 0.08) | |
| Steering angle | Inner wheel | 31°45' ± 1°30' |
| Outer wheel (reference) | 27°15' | |
| Camber (selectable from 2 options) | -1 °00' ± 30' or-2°00' ± 30' (Left/right deviation within 30') | |
| Caster | 3°55' ± 30' (Left/right deviation within 30') | |
| Kingpin inclination | 13°45' ± 1°30' | |
| Lower arm ball joint breakaway torque N.m ( in-lb) | 0.5-3.4 (4.4-30.1) | |
| Lower arm pillow ball bushing rotation starting torque N.m ( in-lb) | 0.5-3.0 (4.4-26.6) | |
| Stabilizer link ball joint turning torque N.m ( in-lb) | 1.7-3.2 (15-28) | |