Fastener Tightening Specifications
WARNING: This page is about a different variant/trim than selected.
Fastener Tightening Specifications
| ITEM | SPECIFICATION |
|---|---|
| Brake line | |
| Brake tube flare nut | 15 ± 2 N.m (12 ± 1 ft-lb) |
| Brake pedal | |
| Brake pedal assembly bolt | 12 ± 2 N.m (107 ± 17 in-lb) |
| Brake pedal assembly nut | 14 ± 3 N.m (124 ± 26 in-lb) |
| Front disc brake | |
| Brake hose connector bolt | 30 ± 5 N.m (22 ± 4 ft-lb) |
| Caliper bleeder | 14 ± 2 N.m (124 ± 18 in-lb) |
| Front brake assembly mounting bolt | 108 ± 10 N.m (80 ± 7 ft-lb) |
| Master cylinder assembly and brake booster | |
| Brake booster mounting nut | 14 ± 3 N.m (124 ± 26 in-lb) |
| Fitting | 16 ± 1 N.m (12 ± 1 ft-lb) |
| Master cylinder mounting nut | 10 ± 2 N.m (89 ± 17 in-lb) |
| Operating rod jam nut | 22 ± 3 N.m (16 ± 2 ft-lb) |
| Proportioning valve <Vehicles without ABS> | 30 ± 5 N.m (22 ± 4 ft-lb) |
| Rear disc brake | |
| Brake hose connector bolt | 15 ± 2 N.m (12 ± 1 ft-lb) |
| Caliper bleeder | 14 ± 2 N.m (124 ± 18 in-lb) |
| Rear brake assembly mounting bolt | 54 ± 5 N.m (40 ± 4 ft-lb) |