LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2005 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (General -- Evolution) >> Maintenance Service >> 13. Transfer Oil >> Transfer Oil Level Check

Transfer Oil Level Check

WARNING: This page is about a different variant/trim than selected.
  1. Remove the filler plug.
  2. Check that the oil level is up to the lower edge of the filler plug hole.
  3. Check that the oil is not noticeably dirty.
  4. Tighten the filler plug to the specified torque.
    • Tightening torque: 32 +/- 2 N.m (23 +/- 2 ft.lb) 
    Fig 1: Removing Filler Plug
    G02483569Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals