INSPECTION PROCEDURE 3: Accelerator Pedal Operation Not Smooth (Over Acceleration): Diagnosis

STEP 1. Check the accelerator pedal.
Q: Is the accelerator pedal loose?
- YES : Tighten, then go to Step 4 .
- NO : Go to Step 2.
STEP 2. Check the accelerator cable wiring.
Q: Is the accelerator cable routing bent sharply?
- YES : Repair, then go to Step 4 .
- NO : Go to Step 3.
STEP 3. Check the accelerator cable lubricant.
Q: Is the accelerator cable lubricated sufficiently?
- YES : There is no action to be taken.
- NO : Refill or replace the lubricant, then go to Step 4.
STEP 4. Check symptom.
Q: Does the accelerator pedal work normally?
- YES : This diagnosis is complete.
- NO : Go to Step 1 .