LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2005 >> Eclipse GTS, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnosis >> Automatic Transaxle Diagnosis >> Diagnostic Function >> Initialization Procedure

Initialization Procedure

  1. Shift the selector lever to the P range and turn the ignition switch to the LOCK (OFF) position. Then, connect the MUT-III to the diagnosis connector.
  2. Initialize the learned value on the initialization screen.
  3. After this initialization, make the MPI engine learn the idling.
scientia non olet · About LEMON Manuals