< Scan Tool Or Voltmeter >
If a problem is found in the Pulse Check, observe the following illustration.
Service Data Inspection Referance Chart (Scan Tool Or Voltmeter)
| SYMPTOM | INSPECTION PROCEDURE | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ETACS-ECU does not receive a signal from the key reminder switch. | P-1 | ||||||||||||||||||||||
| ETACS-ECU does not receive a signal from the hazard warning light switch. | P-2 | ||||||||||||||||||||||
| ETACS-ECU does not receive a signal from the driver's seat belt switch. | P-3 | ||||||||||||||||||||||
| ETACS-ECU does not receive any signal from the driver's or front passenger's door lock key cylinder switch. | P-4 | ||||||||||||||||||||||
| ETACS-ECU does not receive any signal from the driver's or front passenger's door lock actuator switch. | P-5 | ||||||||||||||||||||||
| The ETACS-ECU does not receive any signal from the door lock switches (incorporated in power window main switch and power window sub switch). | P-6 | ||||||||||||||||||||||
| ETACS-ECU does not receive an auto-stop signal from the rear wiper motor. | P-7 | ||||||||||||||||||||||
| ETACS-ECU does not receive a signal from the hood switch. | P-8 | ||||||||||||||||||||||
| ETACS-ECU does not receive a signal from the liftgate latch switch < ECLIPSE> or trunk lid latch switch < ECLIPSE SPYDER>. | P-9 | ||||||||||||||||||||||
| The liftgate lock key cylinder switch < ECLIPSE> or the trunk lid lock key cylinder switch < ECLIPSE SPYDER> signal is not sent to the ETACS-ECU. | P-10 | ||||||||||||||||||||||
| ETACS-ECU does not receive a signal from the vehicle speed signal < M/T>. | P-11 | ||||||||||||||||||||||
| ETACS-ECU does not receive vehicle speed signal < A/T>. | P-12 | ||||||||||||||||||||||
| Transmitter | ETACS-ECU does not receive a signal from the lock, unlock, trunk or panic switch. | P-13 | |||||||||||||||||||||
| ETACS-ECU does not Receive a Interior Light Loaded Signal. | P-14 | ||||||||||||||||||||||