LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2005 >> Eclipse GT, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Diagnosis) >> Automatic Transaxle Diagnosis >> Diagnostic Function >> How To Initialize A/T Learning Value Aim

How To Initialize A/T Learning Value Aim

WARNING: This page is about a different variant/trim than selected.

The use of EEPROM has enabled the A/T learned value to be retained even after the battery terminals are disconnected. However, the learned value should be initialized if the A/T assembly, the engine assembly, the valve body assembly or the solenoid valves are replaced. The initialization procedure is as below:

scientia non olet · About LEMON Manuals