Fastener Tightening Specifications
FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| Centermember to frame bolt | 69 +/-10 N.m (51 +/-7 ft-lb) |
| Centermember to crossmember bolt | 69 +/-10 N.m (51 +/-7 ft-lb) |
| Crossmember mounting bolt | 49 +/-10 N.m (37 +/-7 ft-lb) |
| Crossmember mounting nut | 167 +/-9 N.m (123 +/-7 ft-lb) |
| Cylinder clamp assembly bolt, gear box connecting bolt | 70 +/-10 N.m (52 +/-7 ft-lb) |
| Control wiring harness bracket bolt | 23 +/-3 N.m (17 +/-2 ft-lb) |
| Engine front mounting bracket to engine nut | 45 +/-5 N.m (34 +/-3 ft-lb) |
| Engine front mounting bracket to frame bolt | 44 +/-10 N.m (33 +/-7 ft-lb) |
| Engine front mounting bracket to frame nut | 44 +/-10 N.m (33 +/-7 ft-lb) |
| Front roll stopper to center member bolt | 45 +/-5 N.m (34 +/-3 ft-lb) |
| Front roll stopper to transaxle bolt | 52 +/-7 N.m (39 +/-5 ft-lb) |
| Ground cable connecting bolt | 24 +/-4 N.m (16 +/-3 ft-lb) |
| Lower arm and crossmember connecting bolt front | 186 +/-10 N.m (138 +/-7 ft-lb) |
| Lower arm and crossmember connecting bolt rear | 167 +/-9 N.m (123 +/-7 ft-lb) |
| Lower arm to knuckle connecting nut | 108 +/-10 N.m (80 +/-7 ft-lb) |
| Power steering gear box to return tube clamp bolt | 12 +/-2 N.m (102 +/-22 in-lb) |
| Pressure hose eye bolt | 57 +/-7 N.m (42 +/-5 ft-lb) |
| Rear roll bracket to harness clamp bolt | 11 +/-1 N.m (98 +/-8 in-lb) |
| Rear roll stopper to crossmember bolt | 45 +/-5 N.m (34 +/-3 ft-lb) |
| Rear roll rod to rear roll mount bracket nut <AWD> | 52 +/-7 N.m (39 +/-5 ft-lb) |
| Rear roll rod to rear roll rod bracket nut <AWD> | 52 +/-7 N.m (39 +/-5 ft-lb) |
| Rear roll rod bracket to crossmember bolt <AWD> | 45 +/-5 N.m (34 +/-3 ft-lb) |
| Rear roll stopper to rear roll mount bracket nut <FWD> | 52 +/-7 N.m (39 +/-5 ft-lb) |
| Rear roll mount bracket to transaxle bolt <FWD> | 70 +/-10 N.m (52 +/-7 ft-lb) |
| Stabilizer bracket bolt | 21 +/-4 N.m (16 +/-2 ft-lb) |
| Steering shaft and gear box connecting bolt | 18 +/-2 N.m (13 +/-2 ft-lb) |
| Transaxle mount to frame nut | 82 +/-7 N.m (61 +/-5 ft-lb) |
| Transaxle mount to transaxle nut | 47 +/-7 N.m (35 +/-5 ft-lb) |
| Tie rod end to knuckle fixing nut | 25 +/-4 N.m (19 +/-3 ft-lb) |