LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2004 >> Lancer Sportback LS, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnosis SPORTBACK >> On-Vehicle Service >> Automatic Transaxle Control Component Check >> Stoplight Switch Check

Stoplight Switch Check

  1. On vehicles without cruise control, connect an ohmmeter between stoplight switch connector terminals. On vehicles with cruise control, connect an ohmmeter between Green and Red wire terminals.
  2. On all models, there should be no continuity between the terminals when the plunger is pushed in .16" (4 mm). There should be continuity when plunger is released. Replace switch as necessary.
scientia non olet · About LEMON Manuals