LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2004 >> Lancer LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 59 (Simplified Wiring System (SWS) - Evolution) >> SWS Diagnosis >> Symptom Procedures >> Flasher Timer >> Flasher Timer Function >> Turn-Signal Light

Turn-Signal Light

WARNING: This page is about a different variant/trim than selected.

The turn-signal light output (flashing signal) is turned ON when the turn-signal light ignition switch is ON and the turn-signal light switch is ON (LH or RH.) If the front turn-signal light or rear turn-signal light bulb has burned out, the flashing speed increases to indicate that the bulb has burned out.

Fig 1: View Of Turn-Signal Light Function
G03491083Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals