LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2004 >> Lancer Evolution >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 60 (Front Suspension - SPORTBACK) >> Stabilizer Bar >> Removal And Installation >> Notes

Removal And Installation: Notes

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Before removing the steering wheel and air bag module assembly, refer to AIR BAG SAFETY PRECAUTIONSPASSENGER-SIDE AIR BAG MODULE Also, put the front wheels in straight-ahead position. Failure to do so may damage clock spring and render the SRS air bag inoperative, which serious driver injury.
  • *: Indicates parts which should be initially tightened, and then fully tightened after placing the vehicle horizontally and loading the full weight of the engine on the vehicle body.
    Fig 1: Removing And Installing Stabilizer Bar
    G00994262Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.