LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2004 >> Lancer Evolution >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Power Steering - SPORTBACK) >> On-Vehicle Service >> Fluid Replacement

Fluid Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Raise and support the front wheels.
  2. Disconnect the return hose connection.
  3. Connect a vinyl hose to the return hose, and drain the fluid into a container.
    CAUTION: Be careful not to position the high-tension cable near the fuel rail.
  4. Disconnect the high-tension cable.
  5. While operating the starter motor intermittently, turn the steering wheel all the way to the left and right several times to drain all of the fluid.
    Fig 1: Disconnecting Return Hose
    G00996008Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  6. Connect the return hose securely, and then secure with the clip.
  7. Fill the oil reservoir with GENUINE MITSUBISHI POWER STEERING FLUID up to the lower position of the filler, and then bleed the air.
scientia non olet · About LEMON Manuals