LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2004 >> Lancer Evolution >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Diagnosis) >> On-Vehicle Service >> Automatic Transaxle Control Component Check >> Transmission Fluid Temperature Sensor Check

Transmission Fluid Temperature Sensor Check

WARNING: This page is about a different car, the 2004 Mitsubishi Galant. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission fluid temperature sensor.
  2. Measure the resistance between terminals 1 and 2 of the transmission fluid temperature sensor connector.

    Standard value: 

    Fig 1: Checking Transmission Fluid Temperature Sensor
    G00942603Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 2: Transmission Fluid Temperature Table
    G00942604Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. If the transmission fluid temperature sensor resistance is outside the specified range and the "N" range indicator light is flashing, replace the transmission fluid temperature sensor.
    NOTE: The "N" range indicator light on the combination meter flashes when the temperature reaches approximately 125°C (257°F) or greater, and then stops flashing when the temperature drops below approximately 115°C (238°F).
scientia non olet · About LEMON Manuals