LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2004 >> Lancer Evolution >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Axle Shafts >> Front Axle Hub Assembly & Drive Shafts - Evolution >> Drive Shaft Assembly >> Disassembly And Assembly >> Assembly Service Points >> >> B << Spider Assembly Installation

>> B << Spider Assembly Installation

CAUTION:
  • The drive shaft joint use special grease. Do not mix old and new or different types of grease.
  • If the spider assembly has been cleaned, take special care to apply the specified grease.
  1. Apply the specified grease furnished in the repair kit to the spider assembly between the spider axle and the roller.
    1. Specified grease: Repair kit grease 
  2. Install the spider assembly to the shaft from the direction of the spline chamfered side.
    Fig 1: Installing Spline Chamfered Side
    G00984100Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals