LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2004 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 40 (Manual Transaxle On-Vehicle Service - Evolution) >> On-Vehicle Service >> Transfer Oil Check

Transfer Oil Check

WARNING: This page is about a different variant/trim than selected.
  1. Remove the filler plug.
  2. Check that the oil level is up to the lower edge of the filler plug hole.
  3. Check that the oil is not noticeably dirty. Replace if necessary.
  4. Tighten the filler plug to the specified torque.
    1. Tightening torque: 32+/-2 N.m (23+/-2 ft-lb) 
    Fig 1: Checking Transfer Oil
    G00977646Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals