LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2004 >> Eclipse GTS, Automatic >> Repair and Diagnosis >> Engine Performance >> Ignition System >> On-Vehicle Service >> Ignition Coil Check >> < 3.0L Engine>

< 3.0L Engine>

  1. Measurement of the primary coil resistance. Measure the resistance between connector terminals 1 and 2 of the distributor.

    Standard value: 0.56 - 0.68 Ω

    Fig 1: Identifying High-Voltage Terminal
    G03303397Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Measurement of the secondary coil resistance Measure the resistance between the high-voltage terminal and connector terminal 1.

    Standard value: 9.4 - 12.8 kΩ

scientia non olet · About LEMON Manuals