LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2004 >> Diamante LS >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Auto-Cruise Control System >> On-Vehicle Service >> Auto-Cruise Control System Operation Check >> Speed Reduction Setting

Speed Reduction Setting

  1. Set to the desired speed.
  2. Switch ON the SET switch.
  3. Check to be sure that deceleration continues while the switch is pressed, and that when it is released the constant speed at the time when it was released becomes the driving speed.
    NOTE: When the vehicle speed reaches the low limit [approximately 40 km/h (25 mph)] during deceleration, the auto-cruise control will be cancelled.
    Fig 1: Switching On The SET Switch
    G01147771Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals