LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2004 >> Diamante LS >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Auto-Cruise Control System >> On-Vehicle Service >> Auto-Cruise Control System Operation Check >> Auto-Cruise Control Setting

Auto-Cruise Control Setting

  1. Switch ON the main switch.
  2. Drive at the desired speed within the range of approximately 40-200 km/h (25-124 mph).
  3. Switch ON the SET switch.
  4. Check to be sure that when the switch is released the speed is the desired constant speed.
NOTE: If the vehicles speed decreases to approximately 15 km/h (9 mph) below the set speed because of climbing a hill for example, the auto-cruise control will be cancelled.
Fig 1: Switching On The SET Switch
G01147769Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals