Steering Angle Check

Place the front wheel on a turning radius gauge and measure the steering angle.
Standard value:

Fig 1: Wheel Turning Radius Specifications
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Measuring Turning Radius & Steering Angle
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
If the steering angle is not within the standard value, adjust the toe-in by undoing the clip and turning the left and right tie rod turnbuckles by the same amount (in opposite directions).
Standard value: 2.5 +/- 2.5 mm (0.1 +/- 0.1 inch)

Fig 3: Identifying Bellows Clip
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.