Power Steering Fluid Replacement
- Jack up the front wheels and support them.
- Disconnect the return hose A connection. (Refer to
POWER STEERING HOSES .)
- Connect a vinyl hose to the return hose A, and drain the fluid into a container.
- Disconnect the ignition coil connector. (Refer to IGNITION COIL
.)
- While operating the starting motor intermittently, turn the steering wheel all the way to the left and right several times to drain all of the fluid.
- Connect the return hose A securely, and then secure with the clip.
- Fill the oil reservoir with GENUINE MITSUBISHI POWER STEERING FLUID up to the lower position of the filler, and then bleed the air. See POWER STEERING SYSTEM AIR BLEEDING .
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.