Fastener Tightening Specifications
FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION | |
|---|---|---|
| Park/neutral position switch body mounting bolts | 10 - 12 N.m (89 - 106 in-lb) | |
| A/T key interlock and shift lock mechanisms | ||
| Key interlock cable | 12 N.m (106 in-lb) | |
| Shift lock cable | 12 N.m (106 in-lb) | |
| Oil pan | ||
| No.2 crossmember | 64 N.m (47 ft-lb) | |
| Oil pan | 11 N.m (98 in-lb) | |
| Transmission assembly to No.2 crossmember <R4A51> | 22 N.m (16 ft-lb) | |
| Transmission assembly to No.2 crossmember <V4A51> | 49 N.m (36 ft-lb) | |
| Powertrain control module (PCM) | ||
| Powertrain control module (PCM) | M6 | 5 N.m (44 in-lb) |
| Ground | 9 N.m (80 in-lb) | |
| Powertrain control module (PCM) bracket | 5 N.m (44 in-lb) | |
| Transmission assembly | ||
| Air breather pipe assembly | 74 N.m (55 ft-lb) | |
| Dynamic damper <V4A51 > | 35 N.m (26 ft-lb) | |
| Eye bolt | 39 - 44 N.m (29 - 32 ft-lb) | |
| Filler tube assembly (engine side) | 24 N.m (18 ft-lb) | |
| Filler tube assembly (transmission side) | 44 N.m (32 ft-lb) | |
| No.2 crossmember | 64 N.m (47 ft-lb) | |
| Rear engine mount bracket | 44 N.m (33 ft-lb) | |
| Rear engine support insulator | 20 - 24 N.m (15 - 18 ft-lb) | |
| Starter | 31 N.m (23 ft-lb) | |
| Torque converter and drive plate connection bolt | 45 - 52 N.m (33 - 38 ft-lb) | |
| Transmission assembly (engine to transmission) | 88 N.m (65 ft-lb) | |
| Transmission assembly (transmission to engine) | 74 N.m (55 ft-lb) | |
| Transmission assembly to No.2 crossmember <R4A51> | 22 N.m (16 ft-lb) | |
| Transmission assembly to No.2 crossmember <V4A51> | 49 N.m (36 ft-lb) | |
| Transmission control cable connection nut | 24 N.m (18 ft-lb) | |
| Transmission stay | 35 N.m (26 ft-lb) | |
| Transmission control | ||
| Cable bracket | 12 N.m (106 in-lb) | |
| Cable end bracket | 24 N.m (18 ft-lb) | |
| Indicator assembly | 1.5 N.m (13 in-lb) | |
| Key interlock cable | 12 N.m (106 in-lb) | |
| Retainer | 5 N.m (44 in-lb) | |
| Selector lever assembly | 12 N.m (106 in-lb) | |
| Selector lever to bracket | 12 N.m (106 in-lb) | |
| Shift lock cable | 12 N.m (106 in-lb) | |
| Stopper plate | 19 N.m (15 ft-lb) | |
| Shift knob attaching screw | 2.0 N.m (18 in-lb) | |
| Transmission control upper lever | 24 N.m (18 ft-lb) | |
| Transmission oil cooler | ||
| Eye bolt | 39 - 44 N.m (29 - 32 ft-lb) | |