LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2003 >> Montero Sport LS, RWD >> Repair and Diagnosis >> Suspension >> Front Suspension >> Torque Specifications

Torque Specifications

TORQUE SPECIFICATIONS

Component Ft. Lbs. (N.m)
Anchor Arm Assembly Adjusting Nut 32 (44)
Anti-Lock Brake System (ABS) Rotor Bolt 16 (22)
Brake Disc-To-Hub Assembly Nut 36-43 (49-59)
Brake Hose Nut 11 (15)
Bump Stopper Nut 18 (25)
Caliper Assembly Bolt 65 (88)
Front Anchor Arm Nut 78 (106)
Hub Cap Bolt 36-43 (49-59)
Jam Nut (1)
Lower Arm Ball Joint Assembly Nut 60 (81)
Lower Arm Ball Joint-To-Knuckle Nut 87-131 (118-177)
Lower Arm Nut 101-116 (137-157)
Lower Arm Shaft Nut 101-116 (137-157)
Shock Absorber Nut
Lower 65-76 (88-103)
Upper 11 (15)
Tie Rod End Nut 32 (44)
Upper Arm Ball joint Assembly 18 (25)
Upper Arm Ball Joint-To-Knuckle Nut 44-65 (59-88)
Upper Arm Nut 72-87 (98-118)
INCH Lbs. (N.m) 
Heat Protector Bolt 43.4 (4.9)
Speed Sensor Bracket Bolt 89 (10)
Stabilizer Bracket Bolts 106 (12)
(1) Tighten the jam nuts to 94-145 ft. lbs. (127-196 N.m) and then turn the hub assembly to run the bearings. Loosen the jam nuts to 0 INCH lbs. (0 N.m). Re-tighten to 18 ft. lbs. (25 N.m). Loosen the jam nuts by approximately 30 degrees.