LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2003 >> Montero Sport LS, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Self-Diagnostic System >> Retrieving Diagnostic Trouble Codes

Retrieving Diagnostic Trouble Codes

NOTE: DO NOT skip any steps in self-diagnostic tests or incorrect diagnosis may result. Ensure self-diagnostic test applies to vehicle being tested.
  1. Refer to manufacturer's operation manual for instructions in use of scan tool. Before entering on-board diagnostics, see SERVICE PRECAUTIONS . Locate OBD-II Data Link Connector (OBD-II DLC) under instrument panel, near steering column.
  2. Turn ignition switch to OFF position. Connect scan tool to DLC. Turn ignition switch to ON position. Read and record scan tool self-diagnostic output. Proceed to DIAGNOSTIC TROUBLE CODE DEFINITIONS . If scan tool will not communicate with PCM, diagnose communication concern. See SCAN TOOL WILL NOT COMMUNICATE  under DIAGNOSTIC CIRCUIT CHECK. Turn ignition switch to OFF position before disconnecting scan tool.
scientia non olet · About LEMON Manuals