DTC Set Conditions
If the resistance value for the low-reverse solenoid valve circuit is greater than 3.5ohm(open) or less than 2.6 ohm(short) for 4 seconds, DTC 31 is set. The transaxle is locked into 3rd gear as a fail-safe measure.
If the resistance value for the low-reverse solenoid valve circuit is greater than 3.5ohm(open) or less than 2.6 ohm(short) for 4 seconds, DTC 31 is set. The transaxle is locked into 3rd gear as a fail-safe measure.