LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2003 >> Lancer Evolution >> Repair and Diagnosis (Single Page) >> Transmission >> Manual Trans >> Manual Transaxle Overhaul - Evolution >> Transaxle >> Disassembly And Assembly >> Assembly Service Points >> >> I << Select Lever Installation

>> I << Select Lever Installation

  1. Apply grease (Mitsubishi Genuine Part number 0101011 or equivalent) to the control shift sliding portion of the select lever shoe.
  2. Install the select lever and tighten the bolts to specified torque.
    1. Tightening torque: 18 +/- 3 N.m (13 +/- 2 ft-lb)
scientia non olet · About LEMON Manuals