Fastener Tightening Specifications

ITEM	SPECIFICATION
Center member to frame bolt	69 ± 10 N.m (51 ± 7 ft-lb)
Center member to crossmember bolt	69 ± 10 N.m (51 ± 7 ft-lb)
Crossmember mounting bolt	49 ± 10 N.m (36 ± 7 ft-lb)
Crossmember mounting nut	167 ± 9 N.m (123 ± 7 ft-lb)
Cylinder clamp assembly bolt, gear box connecting bolt	70 ± 10 N.m (52 ± 7 ft-lb)
Engine mount insulator to bracket bolt	84 ± 17 N.m (62 ± 13 ft-lb)
Engine mount bracket to engine nut	67 ± 7 N.m (50 ± 5 ft-lb)
Engine mount insulator to frame bolt	44 ± 10 N.m (33 ± 7 ft-lb)
Front roll stopper to center member bolt	35 ± 5 N.m (26 ± 4 ft-lb)
Front roll stopper to transaxle nut	52 ± 7 N.m (39 ± 5 ft-lb)
Lower arm and crossmember connecting bolt front	186 ± 10 N.m (137 ± 7 ft-lb)
Lower arm and crossmember connecting bolt rear	167 ± 9 N.m (123 ± 7 ft-lb)
Lower arm to knuckle connecting nut	108 ± 10 N.m (80 ± 7 ft-lb)
Oil pump eye bolt	57 ± 7 N.m (42 ± 5 ft-lb)
Pressure tube flare nut	15 ± 3 N.m (11 ± 2 ft-lb)
Rear roll bracket to harness clamp bolt	11 ± 1 N.m (93 ± 13 in-lb)
Rear roll stopper to crossmember bolt	35 ± 5 N.m (26 ± 4 ft-lb)
Rear roll stopper to rear roll mount bracket nut	52 ± 7 N.m (39 ± 5 ft-lb)
Rear roll mount bracket to transaxle bolt	69 ± 10 N.m (51 ± 7 ft-lb)
Stabilizer bracket bolt	21 ± 4 N.m (16 ± 2 ft-lb)
Steering shaft and gear box connecting bolt	18 ± 2 N.m (13 ± 2 ft-lb)
Transaxle mount to frame bolt	82 ± 7 N.m (61 ± 5 ft-lb)
Transaxle mount to transaxle nut	47 ± 7 N.m (35 ± 5 ft-lb)
Tie rod end to knuckle fixing nut	25 ± 4 N.m (18 ± 3 ft-lb)