Traction Control System (TCL)
- General Description
- Traction Control System (TCL) Diagnosis
- TCL Diagnostic Trouble Code Detection Conditions
- TCL Diagnostic Troubleshooting Strategy
- TCL Trouble Code Diagnosis
- Diagnostic Trouble Code Chart
- Symptom Chart
- Symptom Procedures
- INSPECTION PROCEDURE 1: Communication With Scan Tool is not Possible. (Communication With TCL Only is not Possible.)
- INSPECTION PROCEDURE 2: When the Ignition Switch is Turned to the "ON" (Engine Stopped or After Start-up), the TCL Indicator Light does not Illuminate.
- INSPECTION PROCEDURE 3: When the Ignition Switch is Turned to the "ON" (Engine Stopped or After Start-up), the TCL Warning Light does not Illuminate.
- INSPECTION PROCEDURE 4: The TCL Indicator Light Remains Illuminated After the Engine is started.
- INSPECTION PROCEDURE 5: The TCL Warning Light Remains Illuminated After the Engine is Started.
- INSPECTION PROCEDURE 6: The TCL System does not Operate.
- Data List Reference Table
- Actuator Test Reference Table
- Check At Abs-Ecu
- Special Tools
- On-Vehicle Service