LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2003 >> Eclipse RS, Standard >> Repair and Diagnosis >> Steering >> Power Steering >> On-Vehicle Service >> Fluid Replacement

Fluid Replacement

  1. Raise and support the front wheels.
  2. Disconnect the return hose connection.
  3. Connect a vinyl hose to the return hose, and drain the fluid into a container.
    Fig 1: Identifying Return Hose And Vinyl Hose Pipe
    G01880395Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    CAUTION: Be careful not to position the high-tension cable near the fuel rail.
  4. Disconnect the high-tension cable.
  5. While operating the starter motor intermittently, turn the steering wheel all the way to the left and right several times to drain all of the fluid.
  6. Connect the return hose securely, and then secure with the clip.
  7. Fill the oil reservoir with DIAMOND ATF up to the lower position of the filler, and then bleed the air.
scientia non olet · About LEMON Manuals