One Turn Magnetic Compensation

The compass is self-calibrating under normal driving conditions. It is not necessary to manually calibrate the compass. If manual calibration is desired, follow these instructions.

1. Engine started.
2. Display the compass on the multi-center display.
3. Press and hold the "H" switch until "- -" appears in the display.
4. Release the switch to enter the calibration mode.
   Fig 1: Pressing And Holding "H" Switch

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
5. Drive very slowly in a circle until "- -" disappears.
   Fig 2: Driving Very Slowly In A Circle

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.