Fastener Tightening Specifications
WARNING: This page is about a different variant/trim than selected.
Identifying Fastener Tightening Specifications
| ITEMS | SPECIFICATIONS | |
|---|---|---|
| Auto-tensioner attaching bolt | 23 ± 3 N.m (17 ± 3 ft-lb) | |
| Bell housing cover attaching bolt (bolt, flange) | 26 ± 4 N.m (19 ± 3 ft-lb) | |
| Bell housing cover attaching bolt (bolt, washer assembled) | 8.8 ± 1.0 N.m (78 ± 9 in-lb) | |
| Camshaft position sensor sensing cylinder attaching bolt | 21 ± 4 N.m (16 ± 3 ft-lb) | |
| Camshaft position sensor support attaching bolt | 14 ± 1 N.m (117 ± 13 in-lb) | |
| Camshaft sprocket attaching bolt | 88 ± 10 N.m (65 ± 7 ft-lb) | |
| Crankshaft pulley attaching bolt | 25 ± 4 N.m (18 ± 4 ft-lb) | |
| Crankshaft sprocket attaching bolt | 118 ± 9 N.m (87 ± 7 ft-lb) | |
| Cylinder head attaching bolt | 79 ± 4 N.m → 0 N.m → 20 ± 2 N.m → ± 90° → ± 90° (58 ± 3 ft-lb → 0 in-lb → 15 ± 1 ft-lb → ± 90° → ± 90°) | |
| Drive plate attaching bolt <A/T> | 132 ± 5 N.m (98 ± 3 ft-lb) | |
| Engine mount bracket attaching bolt | M12 x 74 | 86 ± 12 N.m (64 ± 8 ft-lb) |
| M12 x 108 | 81 ± 12 N.m (60 ± 9 ft-lb) | |
| Engine mount bracket attaching nut | 86 ± 12 N.m (64 ± 8 ft-lb) | |
| Exhaust manifold bracket attaching bolt | 35 ± 6 N.m (26 ± 4 ft-lb) | |
| Flywheel attaching bolt <M/T> | 132 ± 5 N.m (98 ± 3 ft-lb) | |
| High-pressure fuel hose attaching bolt | 4.8 ± 1.0 N.m (44 ± 8 in-lb) | |
| Ignition coil attaching bolt | 9.8 ± 2.0 N.m (87 ± 17 in-lb) | |
| Intake manifold stay attaching bolt | 30 ± 2 N.m (23 ± 2 ft-lb) | |
| Oil dipstick guide attaching bolt | 14 ± 1 N.m (117 ± 13 in-lb) | |
| Oil pan attaching bolt | 6.9 ± 0.9 N.m (61 ± 8 in-lb) | |
| Oil pan drain plug | 39 ± 5 N.m (29 ± 4 ft-lb) | |
| Power steering oil pump attaching bolt | 29 ± 3 N.m (21 ± 3 ft-lb) | |
| Power steering oil pump bracket attaching bolt | 49 ± 10 N.m (36 ± 7 ft-lb) | |
| Pressure hose attaching bolt | 12 ± 2 N.m (100 ± 22 in-lb) | |
| Pressure tube attaching bolt | 12 ± 2 N.m (100 ± 22 in-lb) | |
| Rocker arm and shaft assembly attaching bolt | 31 ± 3 N.m (23 ± 2 ft-lb) | |
| Rocker cover attaching bolt | 3.4 ± 0.5 N.m (31 ± 4 in-lb) | |
| Tensioner pulley attaching bolt | 48 ± 6 N.m (36 ± 4 ft-lb) | |
| Timing belt B tensioner attaching bolt | 19 ± 3 N.m (14 ± 2 ft-lb) | |
| Timing belt lower cover attaching bolt (bolt, flange) | 11 ± 1 N.m (96 ± 8 in-lb) | |
| Timing belt lower cover attaching bolt (bolt, washer assembled) | 8.8 ± 1.0 N.m (78 ± 9 in-lb) | |
| Timing belt upper cover attaching bolt | M6 | 11 ± 1 N.m (96 ± 8 in-lb) |
| M8 | 14 ± 1 N.m (117 ± 13 in-lb) | |
| Water pump pulley attaching bolt | 8.8 ± 1.0 N.m (78 ± 9 in-lb) | |