Section 7 (On-Vehicle Service - 2.4L Engine): General Description
WARNING: This page is about a different variant/trim than selected.
The 4G64 (2.4L) engine is an in-line four cylinder engine. The cylinder numbers are assigned as 1 - 2 - 3 - 4 from the front of the engine (timing belt side). This engine is fired in the order of the 1, 3, 4 and 2 cylinders.
Identifying General Engine Specifications
| ITEMS | SPECIFICATIONS | ||
|---|---|---|---|
| Type | In-line SOHC | ||
| Number of cylinders | 4 | ||
| Bore mm (in) | 86.5(3.41) | ||
| Stroke mm (in) | 100.0 (3.94) | ||
| Piston displacement cm3 (cu in) | 2,351 (143.4) | ||
| Compression ratio | 9.0 | ||
| Firing order | 1-3-4-2 | ||
| Counterbalance shaft | Equipped | ||
| Valve timing | Intake valve | Opens (BTDC) | 16° |
| Closes (ABDC) | 60° < M/T > 53° < A/T > |
||
| Exhaust valve | Opens (BBDC) | 60° < M/T > 50° < A/T > |
|
| Closes (ATDC) | 16° | ||
| Lubrication | Pressure feed-full flow filtration | ||
| Oil pump type | Involute gear type | ||