LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2003 >> Diamante LS >> Repair and Diagnosis >> Steering >> Power Steering >> On-Vehicle Service >> Fluid Replacement

Fluid Replacement

  1. Raise the front wheels on a jack, and then support them with rigid racks.
  2. Disconnect the return hose connection.
  3. Connect a vinyl hose to the return hose, and drain the oil into a container.
    Fig 1: Connecting Vinyl Hose To Return Hose
    G01926837Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  4. Disconnect the connector from the crankshaft position sensor and then while operating the starter motor intermittently, turn the steering wheel all the way to the left and right several times to drain all of the fluid.
  5. Connect the return hoses securely, and then secure it with the clip.
  6. Fill the oil reservoir with the specified fluid up to the lower position of the filter, and then bleed the air.

    Specified fluid: 

    MITSUBISHI POWER STEERING FLUID 

scientia non olet · About LEMON Manuals