Power Mirror Switch Test
Remove mirror switch. Using an ohmmeter, check continuity of switch. See POWER MIRROR SWITCH CONTINUITY TESTS table. See Fig 1 . Replace switch if continuity is not as specified.
POWER MIRROR SWITCH CONTINUITY TESTS
| Switch Position | (1) Check Continuity Between Pins No. | |||
|---|---|---|---|---|
| Left Side | ||||
| Up | 6 & 8; 9 & 11 | |||
| Down | 6 & 9; 8 & 11 | |||
| Left | 6 & 9; 8 & 10 | |||
| Right | 6 & 8; 9 & 10 | |||
| Right Side | ||||
| Up | 3 & 9; 6 & 8 | |||
| Down | 6 & 9; 8 & 11 | |||
| Left | 6 & 9; 8 & 10 | |||
| Right | 6 & 8; 9 & 10 | |||
|
||||