Cruise Control Switch
WARNING: This page is about a different car, the 2001 Mitsubishi Eclipse. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If vehicle speed decreases about 9 MPH below set speed, set speed will be cancelled. Speed will not set beyond cruise control system limit of 124 MPH.
- Cruise control switch is a multifunction switch mounted on steering column. To operate cruise control system, turn cruise control switch to ON position by depressing end of switch. See Figure . Ensure CRUISE indicator light on instrument cluster illuminates.
- Drive vehicle to about 25 MPH or greater. Push down on cruise control switch to activate SET position and release. Vehicle speed should stay at set speed. To increase set speed, push up on cruise control switch to ACC/RESUME position and hold until new set speed is reached. After switch is released, new set speed should be maintained by system.
- To lower set speed, push down on switch to activate COAST/SET position and hold until new set speed is reached. After switch is released, lower set speed should be maintained by system. To return to set speed after cancellation, push switch up to activate RESUME position. Vehicle speed should return to previous setting before cancellation. Set speed should cancel when any of the following occurs:
- Brake pedal is depressed.
- Clutch pedal is depressed.
- Cruise control cancel switch is activated.
- Cruise control switch is turned to OFF position.
- Transmission is shifted to Neutral.