LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2001 >> Montero XLS >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Specifications & Procedures) >> Wheel Alignment Procedures >> Toe-In Adjustment >> Rear (Mirage)

Rear (Mirage)

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2000 Mitsubishi Montero Sport, 2000 Mitsubishi Montero, 2000 Mitsubishi Mirage, 2000 Mitsubishi Galant, and 2000 Mitsubishi Eclipse. However, it is still accessible from the selected car via links, so may be relevant.

Check rear toe-in. See WHEEL ALIGNMENT SPECIFICATIONS (MIRAGE)  table. If rear toe-in is not within specification, turn toe adjusting bolt to adjust. See Fig 1. On left-hand side, turning bolt clockwise increases toe-in. On right-hand side, turning bolt clockwise increases toe-out. Each graduation equals about .10" (2.5 mm).

Fig 1: Adjusting Rear Toe (Mirage)
G00014573Courtesy of MITSUBISHI MOTOR SALES OF AMERICA