LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2001 >> Montero XLS >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Specifications & Procedures) >> Wheel Alignment Procedures >> Toe-In Adjustment >> Rear (3000GT AWD)

Rear (3000GT AWD)

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2000 Mitsubishi Montero Sport, 2000 Mitsubishi Montero, 2000 Mitsubishi Mirage, 2000 Mitsubishi Galant, and 2000 Mitsubishi Eclipse. However, it is still accessible from the selected car via links, so may be relevant.

Check rear toe-in. See WHEEL ALIGNMENT SPECIFICATIONS (3000GT)  table. If rear toe-in is not within specification, turn assist link eccentric mounting bolts on crossmember side, equal amounts, on both sides. See Fig 1. One graduation changes toe by about .19" (4.8 mm)

NOTE: Adjust camber prior to adjusting toe-in. If camber is adjusted, be sure to adjust toe-in.
Fig 1: Adjusting Rear Toe-In (3000GT)
G93A00323Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals