Test No. 7
- Remove appropriate power window sub-switch from door panel. Test power window sub-switch. See SUB-SWITCH
under COMPONENT TESTS. If power window sub-switch is okay, go to next step. If power window sub-switch is bad, replace switch and retest system.
- Check for continuity in Yellow/Green wire between power window sub-switch and in-line connector C-66. In-line connector C-66 is located above junction block. See Fig 1
. See WIRING DIAGRAMS
. Repair Yellow/Green wire as necessary and retest system. If wire is okay, problem is intermittent. Check all connections and retest system.
Courtesy of MAZDA MOTORS CORP.