Torque Specifications
WARNING: This page is about a different variant/trim than selected.
FASTENER TIGHTENING SPECIFICATIONS
| ITEMS | SPECIFICATIONS | |
|---|---|---|
| Auto-tensioner attaching bolt | 23 ± 3 N.m (17 ± 3 ft-lb) | |
| Camshaft sprocket attaching bolt | 88 ± 10 N.m (65 ± 7 ft-lb) | |
| Camshaft thrust case attaching bolt | 13 ± 2 N.m (109 ± 21 in-lb) | |
| Control wiring harness protector attaching bolt | 5.0 ± 1.0 N.m (44 ± 9 in-lb) | |
| Crankshaft bolt | 182 ± 4 N.m (134 ± 3 ft-lb) | |
| Crankshaft position sensor attaching bolt | 8.8 ± 1.0 N.m (78 ± 9 in-lb) | |
| Cylinder head bolt <cold engine> | 108 ± 5 N.m - 0 N.m - 108 ± 5 N.m (80 ± 3 ft-lb - 0 in-lb - 80 ± 3 ft-lb) | |
| Distributor attaching nut | 13 ± 2 N.m (109 ± 21 in-lb) | |
| Drive plate bolt <A/T> | 74 ± 2 N.m (55 ± 1 ft-lb) | |
| Engine mount bracket attaching bolt | M10 | 86 ± 12 N.m (64 ± 8 ft-lb) |
| M12 | 81 ± 12 N.m (60 ± 9 ft-lb) | |
| Engine mount bracket attaching nut | 86 ± 12 N.m (64 ± 8 ft-lb) | |
| Engine mount stay attaching bolt | 35 ± 6 N.m (26 ± 4 ft-lb) | |
| Engine support bracket right attaching nut | 44 ± 5 N.m (33 ± 3 ft-lb) | |
| Flywheel plate bolt <M/T> | 74 ± 2 N.m (55 ± 1 ft-lb) | |
| Ground wire attaching bolt | 5.0 ± 1.0 N.m (44 ± 9 in-lb) | |
| High-pressure fuel hose attaching bolt | 4.9 ± 1.0 N.m (44 ± 8 in-lb) | |
| Lower oil pan attaching bolt | 11 ± 1 N.m (96 ± 8 in-lb) | |
| Oil dipstick guide attaching bolt | 48 ± 6 N m (36 ± 4 ft-lb) | |
| Oil pan bolt hole cover attaching bolt | 11 ± 1 N.m (96 ± 8 in-lb) | |
| Oil pan drain plug | 39 ± 5 N.m (29 ± 4 ft-lb) | |
| Power steering oil pump attaching bolt | 42 ± 7 N.m (31 ± 5 ft-lb) | |
| Rocker arm and shaft assembly attaching bolt | 31 ± 3 N m (23 ± 2 ft-lb) | |
| Rocker cover attaching bolt | 3.4 ± 0.5 N.m (31 ± 4 in-lb) | |
| Starter attaching bolt | 30 ± 3 N.m (23 ± 2 ft-lb) | |
| Tensioner pulley assembly attaching bolt and nut | 44 ± 10 N.m (33 ± 7 ft-lb) | |
| Timing belt front lower cover attaching bolt | 11 ± 1 N.m (96 ± 8 in-lb) | |
| Timing belt front upper cover attaching bolt | M6 | 11 ± 1 N.m (96 ± 8 in-lb) |
| M8 | 14 ± 1 N.m (117 ± 13 in-lb) | |
| Timing belt rear cover attaching bolt | 14 ± 1 N.m (117 ± 13 in-lb) | |
| Timing belt tensioner arm attaching bolt | 44 ± 10 N.m (33 ± 7 ft-lb) | |
| Timing belt tensioner pulley attaching bolt | 48 ± 6 N.m (36 ± 4 ft-lb) | |
| Upper oil pan attaching bolt | M6 | 5.9 ± 1.0 N.m (52 ± 9 in-lb) |
| M10 | 35 ± 6 N.m (26 ± 4 ft-lb) | |