LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2001 >> Eclipse RS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (3.0L V6) >> Overhaul >> Cylinder Block Assembly >> Cylinder Block

Cylinder Block

WARNING: This page is about a different variant/trim than selected.
  1. Inspect cylinder block for cracks, warpage, cylinder bore taper and out-of-round. Replace or repair cylinder block if not within specification. See CYLINDER BLOCK  table under ENGINE SPECIFICATIONS.
  2. Measure cylinder bore and piston skirt diameter. Piston skirt diameter should be measured at 90-degrees to piston pin. Clearance between piston and cylinder bore must be within specification. See appropriate PISTONS, PINS & RINGS table under ENGINE SPECIFICATIONS .
scientia non olet · About LEMON Manuals