Cylinder Block Specifications
WARNING: This page is about a different variant/trim than selected.
CYLINDER BLOCK
| Application | In. (mm) | ||||||
|---|---|---|---|---|---|---|---|
| Cylinder Bore | |||||||
| Standard Diameter | |||||||
| Diamante | 3.65 (92.7) | ||||||
| Montero & Montero Sport | 3.66 (93.0) | ||||||
| Taper Limit | (1) | ||||||
| Out-Of-Round Limit | (1) | ||||||
| Deck Height | |||||||
| Diamante & Montero | 8.28-8.29 (210.4-210.6) | ||||||
| Montero Sport | 8.97-8.98 (227.8-228.1) | ||||||
| Maximum Deck Warpage | |||||||
| Standard | .002 (.05) | ||||||
| Limit | .004 (.10) | ||||||
| Maximum Grind (2) | .008 (.02) | ||||||
|
|||||||