LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2000 >> Eclipse RS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Controls - On-Vehicle Adjustments) >> Throttle Position (TP) Sensor & Accelerator Pedal Position Sensor >> TP Sensor Adjustment >> Lancer

TP Sensor Adjustment: Lancer

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 Mitsubishi Montero Sport, 2002 Mitsubishi Montero, 2002 Mitsubishi Mirage, 2002 Mitsubishi Lancer, and 2002 Mitsubishi Galant. However, it is still accessible from the selected car via links, so may be relevant.
  1. If using scan tool, connect scan tool to OBD-II Data Link Connector (OBD-II DLC). If not using scan tool, backprobe and connect DVOM (voltmeter) leads to TP sensor terminals No. 1 (sensor output) and No. 2 (sensor ground). Go to next step.
  2. Turn ignition on. Using scan tool or DVOM, check TP sensor output voltage. TP sensor output voltage should be 335-935 millivolts. If TP sensor voltage is not within specifications, go to next step.
  3. Loosen TP sensor mounting bolts. Turn TP sensor body until TP sensor output voltage is within specified range. Hold TP sensor in position and tighten TP sensor mounting bolts. Turn ignition off.
scientia non olet · About LEMON Manuals