LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2000 >> Eclipse RS, Automatic >> Repair and Diagnosis >> Electrical >> Starters >> On-Vehicle Testing >> Starter Relay >> Eclipse (With A/T)

Eclipse (With A/T)

  1. Remove starter relay. See STARTER RELAY LOCATIONS  table. With no power supplied to any terminal, continuity should exist between relay terminals No. 1 and 3. See Figure and WIRING DIAGRAMS  .
  2. Connect a jumper wire from positive battery terminal to relay terminal No. 3 and another jumper wire from negative battery terminal to relay terminal No. 1. Continuity should exist between relay terminals No. 2 and 5. Replace relay as necessary.
scientia non olet · About LEMON Manuals