LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2000 >> Eclipse GS, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock/Traction Control >> Self-Diagnostic System >> Retrieving Diagnostic Trouble Codes >> Using ANTI-LOCK Warning Light

Using ANTI-LOCK Warning Light

  1. To retrieve stored DTCs, locate Data Link Connector (DLC) located under driver side of dash. Turn ignition switch off. Ground DLC terminal No. 1. See Fig 1 .
  2. If DTCs are stored in ECU memory, ANTI-LOCK warning light will began to flash intermittently. Long flashes represent first digit of DTC; short flashes represent second digit. For example, 4 long flashes and 3 short flashes indicate DTC 43. If 2 or more DTCs are stored, lowest number will be displayed first. DTC 51 will always be displayed if valve relay is removed.
  3. After recording DTC(s), see appropriate DTC table under DTC DEFINITION  . If no DTCs are stored, ANTI-LOCK warning light will flash constantly.
Fig 1: Grounding Data Link Connector Terminal
G96I19594Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.